269
edits
Changes
Created page with "* '''Build Area:''' 256x256x256mm (Roughly 10x10x10 inches) * '''Materials''': PLA, PETG, TPU, PVA, PET ** 1.75 mm filament ** Can be fitted with hardened nozzles for printing..."
* '''Build Area:''' 256x256x256mm (Roughly 10x10x10 inches)
* '''Materials''': PLA, PETG, TPU, PVA, PET
** 1.75 mm filament
** Can be fitted with hardened nozzles for printing filaments with fillers (carbon, glow, wood, etc.)
** Supports PA, PC, ABS, ASA with addition of enclosure
== Workflow ==
The Bambu printer does not support OctoPrint, so it must be used with the [https://bambulab.com/en/download/studio Bambu Studio] software and/or app. We recommend using the built-in settings and profiles for most prints. Advanced users can download [https://github.com/SoftFever/OrcaSlicer OrcaSlicer], a FOSS fork of Bambu Studio with advanced features and built in calibration options.
# Import your model(s) into the slicer software
# Arrange the models on the bed. Certain orientations can speed up printing or improve strength.
# Select the slicing options:
#* Bed type (textured or smooth)
#* Material (PLA, PETG, etc)
#* Layer height preset ("0.12 Fine", "0.20 Standard", etc)
#** These settings can be modified if needed, but the presets are a good place to start.
# Slice the model
# Send to printer
#* Required the printer sign-in information which will be given after completing training.
# Monitor the print until it is completed. This can be done in person, through the slicer software, or through the Bambu Handy app.
* '''Materials''': PLA, PETG, TPU, PVA, PET
** 1.75 mm filament
** Can be fitted with hardened nozzles for printing filaments with fillers (carbon, glow, wood, etc.)
** Supports PA, PC, ABS, ASA with addition of enclosure
== Workflow ==
The Bambu printer does not support OctoPrint, so it must be used with the [https://bambulab.com/en/download/studio Bambu Studio] software and/or app. We recommend using the built-in settings and profiles for most prints. Advanced users can download [https://github.com/SoftFever/OrcaSlicer OrcaSlicer], a FOSS fork of Bambu Studio with advanced features and built in calibration options.
# Import your model(s) into the slicer software
# Arrange the models on the bed. Certain orientations can speed up printing or improve strength.
# Select the slicing options:
#* Bed type (textured or smooth)
#* Material (PLA, PETG, etc)
#* Layer height preset ("0.12 Fine", "0.20 Standard", etc)
#** These settings can be modified if needed, but the presets are a good place to start.
# Slice the model
# Send to printer
#* Required the printer sign-in information which will be given after completing training.
# Monitor the print until it is completed. This can be done in person, through the slicer software, or through the Bambu Handy app.