266
edits
Changes
Jump to navigation
Jump to search
Keyboard jogging works only when the Canvas or any non-editable field is selected. If you are in the text editor or in the command line, press <Esc> to select the Canvas. {| class="wikitable"! Key! Command|-| Right arrow| Pan +X|-| Left Arrow| Pan -X|-| Up Arrow| Pan +Y|-| Down Arrow| Pan -Y|-| PgUp| Pan +Z|-| PgDn| Pan -Z|-| + or =| Increase step by one unit (=current decade)|-| - or _| Decrease step by one unit (=current decade)|-| 1| Set as step the step1 (default 0.1) value from the configuration|-| 2| Set as step the step2 (default 1) value from the configuration|-| 3| Set as step the step3 (default 10) value from the configuration|-| *| Multiply step by x10|-| /| Divide step by /10|} There is also a pendant controller that can To be used to send jog commands as well as G-code start and pause. To use the pendant, select the pendant icon from the toolbar on the Control tab (look for the hand icon).filled out
no edit summary
! Setting excessively high jog size can cause commands to be buffered and the machine to crash! Do NOT set jog step higher than 0.5 mm or 0.02 inches!
|}
== Feeds and Speeds ==
* Aluminum
** 1/4" two-flute endmill, 1400 RPM, 4 IPM works well. Feed rate is limited by machine vibration.
== Notes ==
https://motofaction.org/books-catalogues-brochures-manuals/rong-fu-rf-30-31-manual.pdf
