COVID-19 Response/COVID-19 Face Shield

Hacksburg is standing by to produce face shields if requested by local officials or medical facilities.

Design

• Open source face shield from University of Wisconsin: https://www.delve.com/assets/documents/Open-Source-Face-Shield-Drawing.pdf
• Cheap and fast to produce - no 3D printing required

Materials

• Clear shield
  • CLEAR POLYESTER FILM - 0.007" THICK, MCMASTER-CARR PART NUMBER 8567K64 (https://www.mcmaster.com/8567k64)
  • PETG from soda bottles - supplied by Coca-Cola
  • Projector transparencies
• Elastic band
  • ELASTIC LATEX FABRIC (1" WIDE X 13" LONG), MCMASTER-CARR PART NUMBER 88225K68 (https://www.mcmaster.com/88225k68)
• Brow Foam
  • ADHESIVE BACKED POLYURETHANE FOAM (1" TO 1 3/8” THICK), MCMASTER-CARR PART NUMBER 8614K84 (https://www.mcmaster.com/8614k84)