269
edits
Changes
Created page with "Hacksburg is standing by to produce face shields if requested by local officials or medical facilities. == Design == * Open source face shield from University of Wisconsin: ht..."
Hacksburg is standing by to produce face shields if requested by local officials or medical facilities.
== Design ==
* Open source face shield from University of Wisconsin: https://www.delve.com/assets/documents/Open-Source-Face-Shield-Drawing.pdf
* Cheap and fast to produce - no 3D printing required
== Materials ==
* Clear shield
** CLEAR POLYESTER FILM - 0.007" THICK, MCMASTER-CARR PART NUMBER 8567K64 (https://www.mcmaster.com/8567k64)
** PETG from soda bottles - supplied by Coca-Cola
** Projector transparencies
* Elastic band
** ELASTIC LATEX FABRIC (1" WIDE X 13" LONG), MCMASTER-CARR PART NUMBER 88225K68 (https://www.mcmaster.com/88225k68)
* Brow Foam
** ADHESIVE BACKED POLYURETHANE FOAM (1" TO 1 3/8” THICK), MCMASTER-CARR PART NUMBER 8614K84 (https://www.mcmaster.com/8614k84)
== Design ==
* Open source face shield from University of Wisconsin: https://www.delve.com/assets/documents/Open-Source-Face-Shield-Drawing.pdf
* Cheap and fast to produce - no 3D printing required
== Materials ==
* Clear shield
** CLEAR POLYESTER FILM - 0.007" THICK, MCMASTER-CARR PART NUMBER 8567K64 (https://www.mcmaster.com/8567k64)
** PETG from soda bottles - supplied by Coca-Cola
** Projector transparencies
* Elastic band
** ELASTIC LATEX FABRIC (1" WIDE X 13" LONG), MCMASTER-CARR PART NUMBER 88225K68 (https://www.mcmaster.com/88225k68)
* Brow Foam
** ADHESIVE BACKED POLYURETHANE FOAM (1" TO 1 3/8” THICK), MCMASTER-CARR PART NUMBER 8614K84 (https://www.mcmaster.com/8614k84)