Tools/Metalworking/Mill

From Hacksburg Wiki
< Tools‎ | Metalworking
Revision as of 13:32, 2 February 2020 by Username (talk | contribs) (Init)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

CNC Milling

Our CNC mill is controlled by grbl. When your CAM software has an output option for grbl, use it. Otherwise, grbl understands LinuxCNC/MachineKit G-Code and you can use a setting for that. If you have neither option, you can use a generic setting. LinuxCNC/MachineKit try to obey standard G-Code.

Feeds and Speeds

  • Aluminum
    • 1/4" two-flute endmill, 1400 RPM, 4 IPM works well. Feed rate is limited by machine vibration.
Retrieved from "https://wiki.hacksburg.org/index.php?title=Tools/Metalworking/Mill&oldid=1341"