264
edits
Changes
Jump to navigation
Jump to search
→Current Printers: Old printer; modernize
** Has a heated bed (heats slowly, max 75 C, can be raised by insulated bed or building enclosure)
** Can work PLA
** '''Workflow:''' Standalone, prints gcode via micro-SD card, can be connected to computer via USB[[tools/3D_Printing/OctoPrint|OctoPrint]]** '''Settings:''' A working set of settings is available here*** Cura: https://gist.github.com/MaxBareiss/dffded4b12485aaded61313ad5667154*** Prusaslicer (Slic3r): https://gist.github.com/MaxBareiss/9f97218f1111aa1ae0247e9d0fbc3083
* [[tools:3D_Printing/Printrbot Simple|Printrbot Simple Makers Kit]]
*** Requires at least 12V @ 4A for running without heated bed
*** Running the heated bed on battery power has '''not''' been tested and is not allowed at present.
** '''Currently non-functional''' -- Power supply is dangerously unshielded.
* Solidoodle 3
** '''Build Area:''' Roughly 8x8x8 inches
