Tools/3D Printing/Creality CR-10 S4

• Build Area: 400x400x400 mm (Roughly 15.75x15.75x15.75 inches)
• Materials: PLA and PETG
  • Ask before printing other materials or filaments with fillers (carbon, glow, wood, etc))
• Workflow: OctoPrint
• Settings:
  • Prusaslicer (Slic3r): https://gist.github.com/MaxBareiss/9f97218f1111aa1ae0247e9d0fbc3083
    • To load files go to: File > Import > Import Config Bundle
  • Cura: https://gist.github.com/MaxBareiss/dffded4b12485aaded61313ad5667154

Workflow

We recommend the use of PrusaSlicer for the Creality CR-10. A settings file optimized for this printer is here. The most important setting for this printer is to set the maximum acceleration limit to 500 mm/s².

See OctoPrint