266
edits
Changes
Shuffle printers; filament
* [[tools/3D_Printing/Creality CR-10 S4|Creality CR-10 S4]]
** '''Build Area:''' 400x400x400 mm (Roughly 15.75x15.75x15.75 inches)
** Filament diameter: 1.75mm
** Has a heated bed (heats slowly, max 75 C, can be raised by insulated bed or building enclosure)
** Can work PLA
** '''Workflow:''' [[tools/3D_Printing/OctoPrint|OctoPrint]]
** '''Settings:'''
*** [https://github.com/prusa3d/PrusaSlicer/releases Prusaslicer] (Slic3r): https://gist.github.com/MaxBareiss/9f97218f1111aa1ae0247e9d0fbc3083
*** Cura: https://gist.github.com/MaxBareiss/dffded4b12485aaded61313ad5667154
**** To upload files go to: File > Import > Import Config Bundle
* Anycubic Photon
** '''Current components:''' RAMPS board, Arduino, heated bed, thermistor, user interface board, one pulley with CL2 toothed belt
** '''Missing components:''' Just about everything else
== Old Printers ==
* [[tools:3D_Printing/Printrbot Simple|Printrbot Simple Makers Kit]]
** '''Build Area:''' Roughly 4x4x4 inches
** Can work PLA and ABS (has heated bed)
** '''Workflow:''' Connected to computer with Cura 2.4 series slicer.
** Portable; can run on battery power
*** Requires at least 12V @ 4A for running without heated bed
*** Running the heated bed on battery power has '''not''' been tested and is not allowed at present.
** '''Currently non-functional''' -- Power supply is dangerously unshielded.
* Solidoodle 3
** '''Build Area:''' Roughly 8x8x8 inches
** Has a heated bed
** Fully enclosed with acrylic sheeting
** '''Currently non-functional''' -- Has issues with Y-axis traversal, thermistor issues
* Mbot Cube (revision 1)
** '''Build Area:''' Roughly 8x8x8 inches
** No heated bed (though one can be added)
** Dual extruders (though they need alignment)
** Workflow
*** Uses Proprietary MPrint software to communicate with printer via USB
*** Can also print from an .x3g file read from the on-board SD card reader (2 GB maximum capacity); .x3g files can be made in ReplicatorG with appropriate configuration.
** '''Currently non-functional''' -- Bed alignment system is damaged; new print bed needed