=== GCode Production ===
STL is converted to GCode using a ''slicer program'' which produces GCode of slices We recommend the use of PrusaSlicer (Slic3r) for the modeling Creality CR-10. A settings file optimized for the 3D this printer to print. The best slicer for the Printrbot is [httphttps://wikigist.ultimakergithub.com/Cura CuraMaxBareiss/9f97218f1111aa1ae0247e9d0fbc3083 here], which is preinstalled on the computer. The Solidoodle and Mbot have their own workflows. Solidoodle uses Pronterface most important setting for this printer is to send Gcode, though work is ongoing set the maximum acceleration limit to find replacements. Mbot'500 mm/s software toolchain is a bit more complicated² supposedly, it uses RepetierHost, but initial tests were unsuccessful. The Mbot has an onboard control panel with an SD card reader, but uses a nonstandard format for printer instructions (not G-code). Investigations are ongoing.
=== Visual Troubleshooting Guides ===