Tools/Onefinity

The Onefinity is a CNC router. It is used for precision-carving of wood, acrylic, soft metals and other materials. Onefinity generously discounted this unit through a Makerspace support program they offered to Hacksburg.

Onefinity website original model, 32"x32" workspace 

20 second display of cutting with attached vacuum

Safety

You must be properly trained before using this machine. It uses a high speed cutting head that can cause serious injuries and a powerful motors that can damage metal, wood and especially humans! It also produces dust and that can be respiratory hazards, and cut chips that can be an eye or cut hazard. If at any time you feel something is wrong or unsafe, stop the machine. Your safety is more important than what you are working on.

Specifications

Original Series Woodworker Package Includes: Woodworker Cutting Area: 32 1/8"(X) x 32 1/8"(Y) x 5 1/4"(Z) Z-16 Z slider with 133mm travel BB Buildbotics controller Open Loop Nema 23 Stepper Motors on X,Z, Y1 and Y2 axis 1610 Ball Screw on X and Y Axis (Travel Per Revolution is 10mm) 1610 Ball Screw on Z axis (Travel Per Revolution is 4mm) Integrated sensorless stall homing Smart CNC controller with built in software allowing for operation without a computer. 8-inch high-definition industrial capacitive touch LED screen. Rigid, high precision, hardened steel, linear motion Shafts. Precision ball screws on all axis. Conveniently located Emergency Stop. Rapids at 400 Inches Per Minute (IPM). Wi-Fi enabled. 4th Axis Rotary Plug & Play Support Plug and play XYZ Probe Support Plug and play Laser support Joypad support makes jogging and positioning your CNC a breeze Patent Pending Micro Tramming. Quick and easy setup - start carving in under an hour. Open ended front to back allowing for 'tiling' (carving pieces longer than the cutting area) User friendly design. Each unit fully production tested with a test carve to ensure proper functionality and quality. A large “how to” library with a very helpful and supportive community. Compatible with all major CAD software including Vectric, Carveco, and Fusion 360 Bits and Bits 1/4” down cut bit (Included).

• Firmware:
  • GRBL
  • Running on an Arduino Mega with Ramps 1.4 shield
  • 115200 Baud
• Software:
  • LaserGRBL (produces NC code for laser engraving)
  • bCNC (controls the MP-CNC)

Instructions

CNC Router Tutorial (6/1/2025)

Directions for CNC: https://docs.google.com/document/d/1rezNV8CvkTS4Rh4MZ7Z9hnLpWag7rqRkqVutMNwyxKQ/edit