Difference between revisions of "Tools/3D Printing/Creality CR-10 S4"
< Tools | 3D Printing
Jump to navigation
Jump to search
| Line 9: | Line 9: | ||
== Workflow == | == Workflow == | ||
| + | |||
| + | We recommend the use of PrusaSlicer for the Creality CR-10. A settings file optimized for this printer is [https://gist.github.com/MaxBareiss/9f97218f1111aa1ae0247e9d0fbc3083 here]. The most important setting for this printer is to set the maximum acceleration limit to 500 mm/s². | ||
See [[tools/3D_Printing/OctoPrint|OctoPrint]] | See [[tools/3D_Printing/OctoPrint|OctoPrint]] | ||
Latest revision as of 16:57, 8 May 2024
- Build Area: 400x400x400 mm (Roughly 15.75x15.75x15.75 inches)
- Materials: PLA and PETG
- Ask before printing other materials or filaments with fillers (carbon, glow, wood, etc))
- Workflow: OctoPrint
- Settings:
- Prusaslicer (Slic3r): https://gist.github.com/MaxBareiss/9f97218f1111aa1ae0247e9d0fbc3083
- To load files go to: File > Import > Import Config Bundle
- Cura: https://gist.github.com/MaxBareiss/dffded4b12485aaded61313ad5667154
- Prusaslicer (Slic3r): https://gist.github.com/MaxBareiss/9f97218f1111aa1ae0247e9d0fbc3083
Workflow
We recommend the use of PrusaSlicer for the Creality CR-10. A settings file optimized for this printer is here. The most important setting for this printer is to set the maximum acceleration limit to 500 mm/s².
See OctoPrint
