56
edits
Tools/Onefinity: Difference between revisions
m
→Instructions CNC Router Tutorial (6/1/2025)
mNo edit summary |
|||
| Line 49: | Line 49: | ||
* Max cut around 100 in/min 2500 mm/min | * Max cut around 100 in/min 2500 mm/min | ||
* Spindle speed 24000 rpm! | * Spindle speed 24000 rpm! | ||
* Use gcode M3 for spindle on. Delay for spindle acceleration with | * Use gcode M3 for spindle on. Delay for spindle acceleration with: | ||
''S24000 M3 | |||
G4 P8 ‘ dwell for 8 sec'' | |||
* At the endo of your file, Use gcode | * At the endo of your file, Use gcode: | ||
''M5 ‘to turn off spindle'' | |||
Please have someone check your code first until you're very comfortable with this machine!<br> | Please have someone check your code first until you're very comfortable with this machine!<br> | ||
| Line 59: | Line 59: | ||
Note that this file uses metric for X,Y,Z and feedrates (mm/min)<br> | Note that this file uses metric for X,Y,Z and feedrates (mm/min)<br> | ||
===Code Example=== | ===Code Example. Units in millimeters === | ||
# G17 G21 G40 G49 G94 | # G17 G21 G40 G49 G94 | ||
# G0 X0.000 Y0.000 Z6.000 | # G0 X0.000 Y0.000 Z6.000 | ||
| Line 93: | Line 93: | ||
* Air compressor on | * Air compressor on | ||
* Air valve (red) on | * Air valve (red) on | ||
* Controller on. - black box silver button | * Controller on. - black box, silver button | ||
* Home? Clear the edges of debris and tools to allow full motion range! | * Home? Clear the edges of debris and tools to allow full motion range! | ||
* Jog with Xbox controller | * Jog with Xbox controller | ||