223
edits
Tools/3D Printing: Difference between revisions
→Current Printers
| Line 6: | Line 6: | ||
*** Can be fitted with hardened nozzles for printing filaments with fillers (carbon, glow, wood, etc.) | *** Can be fitted with hardened nozzles for printing filaments with fillers (carbon, glow, wood, etc.) | ||
*** Supports PA, PC, ABS, ASA with addition of enclosure | *** Supports PA, PC, ABS, ASA with addition of enclosure | ||
** '''Automatic Material System (AMS)''': | ** [https://wiki.bambulab.com/en/x1/manual/intro-ams'''Automatic Material System (AMS)''']: | ||
*** No Cardboard spools unless adapters are used | *** No Cardboard spools unless adapters are used | ||
*** No TPU filament | *** No TPU or PVA filament | ||
* [[tools/3D_Printing/Creality CR-10 S4|Creality CR-10 S4]] | * [[tools/3D_Printing/Creality CR-10 S4|Creality CR-10 S4]] | ||