269
edits
Tools/3D Printing: Difference between revisions
no edit summary
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
== Current Printers == | == Current Printers == | ||
* [[tools/3D_Printing/Bambu Lab P1P|Bambu Lab P1P]] | |||
** '''Build Area:''' 256x256x256mm (Roughly 10x10x10 inches) | |||
** Filament diameter: 1.75mm | |||
** Materials: PLA, PETG, TPU, PVA, PET | |||
*** Can be fitted with hardened nozzles for printing filaments with fillers (carbon, glow, wood, etc.) | |||
*** Supports PA, PC, ABS, ASA with addition of enclosure | |||
** '''Workflow:''' | |||
*** Does not support OctoPrint, must use stock app. Will receive username and password after training. | |||
** '''Settings:''' | |||
*** Recommend stock Bambu Studio settings | |||
* [[tools/3D_Printing/Creality CR-10 S4|Creality CR-10 S4]] | * [[tools/3D_Printing/Creality CR-10 S4|Creality CR-10 S4]] | ||
** '''Build Area:''' 400x400x400 mm (Roughly 15.75x15.75x15.75 inches) | ** '''Build Area:''' 400x400x400 mm (Roughly 15.75x15.75x15.75 inches) | ||
** Filament diameter: 1.75mm | ** Filament diameter: 1.75mm | ||
** Can work PLA and PETG (ask before printing other materials or filaments with fillers (carbon, glow, wood, etc)) | ** Can work PLA and PETG (ask before printing other materials or filaments with fillers (carbon, glow, wood, etc)) | ||
** '''Workflow:''' [[tools/3D_Printing/OctoPrint|OctoPrint]] | ** '''Workflow:''' [[tools/3D_Printing/OctoPrint|OctoPrint]] | ||