Changes

Tools/Onefinity

39 bytes added, 6 July

m

→‎Instructions CNC Router Tutorial (6/1/2025)

* Max cut around 100 in/min 2500 mm/min

* Spindle speed 24000 rpm!

* Use gcode M3 for spindle on. Delay for spindle acceleration with : * ''S24000 M3 * G4 P8 ‘ dwell for 8 sec '' * At the endo of your file, Use gcode :* ''M5 ‘to turn off spindle''

Please have someone check your code first until you're very comfortable with this machine!<br>

Note that this file uses metric for X,Y,Z and feedrates (mm/min)<br>

===Code Example. Units in millimeters ===

# G17 G21 G40 G49 G94

# G0 X0.000 Y0.000 Z6.000

* Air compressor on

* Air valve (red) on

* Controller on. - black box , silver button

* Home? Clear the edges of debris and tools to allow full motion range!

* Jog with Xbox controller

Henry

56

edits