Tools/3D Printing: Difference between revisions

Tools/3D Printing (view source)

Revision as of 18:18, 28 July 2020

48 bytes added , 28 July 2020

Shuffle printers; filament

Username

Bureaucrats, Interface administrators, Administrators

270

edits

@@ Line 2: / Line 2: @@
 * [[tools/3D_Printing/Creality CR-10 S4|Creality CR-10 S4]]
 ** '''Build Area:''' 400x400x400 mm (Roughly 15.75x15.75x15.75 inches)
+** Filament diameter: 1.75mm
 ** Has a heated bed (heats slowly, max 75 C, can be raised by insulated bed or building enclosure)
 ** Can work PLA
 ** '''Workflow:''' [[tools/3D_Printing/OctoPrint|OctoPrint]]
 ** '''Settings:'''
+*** [https://github.com/prusa3d/PrusaSlicer/releases Prusaslicer] (Slic3r): https://gist.github.com/MaxBareiss/9f97218f1111aa1ae0247e9d0fbc3083
 *** Cura: https://gist.github.com/MaxBareiss/dffded4b12485aaded61313ad5667154
-*** [https://github.com/prusa3d/PrusaSlicer/releases Prusaslicer] (Slic3r): https://gist.github.com/MaxBareiss/9f97218f1111aa1ae0247e9d0fbc3083
 **** To upload files go to: File > Import > Import Config Bundle
-* [[tools:3D_Printing/Printrbot Simple|Printrbot Simple Makers Kit]]
-** '''Build Area:''' Roughly 4x4x4 inches
-** Can work PLA and ABS (has heated bed)
-** '''Workflow:''' Connected to computer with Cura 2.4 series slicer.
-** Portable; can run on battery power
-*** Requires at least 12V @ 4A for running without heated bed
-*** Running the heated bed on battery power has '''not''' been tested and is not allowed at present.
-** '''Currently non-functional''' -- Power supply is dangerously unshielded.
-* Solidoodle 3
-** '''Build Area:''' Roughly 8x8x8 inches
-** Has a heated bed
-** Fully enclosed with acrylic sheeting
-** '''Currently non-functional''' -- Has issues with Y-axis traversal, thermistor issues
-* Mbot Cube (revision 1)
-** '''Build Area:''' Roughly 8x8x8 inches
-** No heated bed (though one can be added)
-** Dual extruders (though they need alignment)
-** Workflow
-*** Uses Proprietary MPrint software to communicate with printer via USB
-*** Can also print from an .x3g file read from the on-board SD card reader (2 GB maximum capacity); .x3g files can be made in ReplicatorG with appropriate configuration.
-** '''Currently non-functional''' -- Bed alignment system is damaged; new print bed needed
 * Anycubic Photon
@@ Line 85: / Line 64: @@
 ** '''Current components:''' RAMPS board, Arduino, heated bed, thermistor, user interface board, one pulley with CL2 toothed belt
 ** '''Missing components:''' Just about everything else
+== Old Printers ==
+* [[tools:3D_Printing/Printrbot Simple|Printrbot Simple Makers Kit]]
+** '''Build Area:''' Roughly 4x4x4 inches
+** Can work PLA and ABS (has heated bed)
+** '''Workflow:''' Connected to computer with Cura 2.4 series slicer.
+** Portable; can run on battery power
+*** Requires at least 12V @ 4A for running without heated bed
+*** Running the heated bed on battery power has '''not''' been tested and is not allowed at present.
+** '''Currently non-functional''' -- Power supply is dangerously unshielded.
+* Solidoodle 3
+** '''Build Area:''' Roughly 8x8x8 inches
+** Has a heated bed
+** Fully enclosed with acrylic sheeting
+** '''Currently non-functional''' -- Has issues with Y-axis traversal, thermistor issues
+* Mbot Cube (revision 1)
+** '''Build Area:''' Roughly 8x8x8 inches
+** No heated bed (though one can be added)
+** Dual extruders (though they need alignment)
+** Workflow
+*** Uses Proprietary MPrint software to communicate with printer via USB
+*** Can also print from an .x3g file read from the on-board SD card reader (2 GB maximum capacity); .x3g files can be made in ReplicatorG with appropriate configuration.
+** '''Currently non-functional''' -- Bed alignment system is damaged; new print bed needed