Difference between revisions of "Tools/Metalworking/Mill"
< Tools | Metalworking
Jump to navigation
Jump to search
(Init) |
(No difference)
|
Revision as of 12:32, 2 February 2020
CNC Milling
Our CNC mill is controlled by grbl. When your CAM software has an output option for grbl, use it. Otherwise, grbl understands LinuxCNC/MachineKit G-Code and you can use a setting for that. If you have neither option, you can use a generic setting. LinuxCNC/MachineKit try to obey standard G-Code.
Feeds and Speeds
- Aluminum
- 1/4" two-flute endmill, 1400 RPM, 4 IPM works well. Feed rate is limited by machine vibration.
