View source for Tools/3D Printing/Creality CR-10 S4

* '''Build Area:''' 400x400x400 mm (Roughly 15.75x15.75x15.75 inches)
* '''Materials''': PLA and PETG
** Ask before printing other materials or filaments with fillers (carbon, glow, wood, etc))
* '''Workflow:''' [[tools/3D_Printing/OctoPrint|OctoPrint]]
* '''Settings:''' 
** [https://github.com/prusa3d/PrusaSlicer/releases Prusaslicer] (Slic3r): https://gist.github.com/MaxBareiss/9f97218f1111aa1ae0247e9d0fbc3083
*** To load files go to: File > Import > Import Config Bundle
** Cura: https://gist.github.com/MaxBareiss/dffded4b12485aaded61313ad5667154

== Workflow ==

We recommend the use of PrusaSlicer for the Creality CR-10. A settings file optimized for this printer is [https://gist.github.com/MaxBareiss/9f97218f1111aa1ae0247e9d0fbc3083 here]. The most important setting for this printer is to set the maximum acceleration limit to 500 mm/s&sup2;.

See [[tools/3D_Printing/OctoPrint|OctoPrint]]